Thursday, 29 August 2019


Besides a number of different things you want to take under consideration when fitting a new flooring, which we have previously mentioned a lot of times in our previous articles, you also need to decide on the direction in which to match the ground. Having said this, remember that if you're fitting a new hardwood flooring over an existing one, you are not left with much choice -- the first floor will ascertain the direction in which you ought to put your new flooring. A crucial thing in this situation is the new boards need to be placed at 90 degrees to the previous ones. Butif you are not laying the new floor over an existing one, then, no matter which way you choose to chose, we differentiate between three major procedures of installation. Those include:

Nail down or stapling

Here is the most conventional hardwood flooring fitting method. Nailing down regularly entails"secret nailing", meaning that claws are placed through the tongue of their floorboards and then coated with the groove of the following board. In the instance of stapled wood flooring installation, we utilize principles which replace the nails, which considerably accelerate the whole procedure.

Floating floor

A floating installation procedure is utilized when the floorboards are nailed nor glued into the sub-floor.

If you are installing a flooring in residential property, you may use this approach to match a brand new flooring over an existing one (however, remember concerning the 90-degree rule cited previously ) after utilizing the ideal underlay, or above a sub floor. In the latter scenario, you can match the planks at the path of your selection.

This installation technique is generally recommended in the event of solid wood floors, except where both the floorboards and the space itself are rather tiny.

Gluing the ground

This is most likely among the most popular floor installation techniques used nowadays, regardless of
the direction for laying your hardwood flooring you've chosen. The first phase in imitating a hardwood flooring consists in coating the sub-floor with flexible wood glue. Then, you have to put the boards right on top.

This sort of floor installation produces a flooring feel quite solid, just like a nailed flooring, and makes it feasible for the boards to expand and contract, depending on the ambient requirements. This is possible, because the gluing merchandise is flexible. Furthermore, if the floor is installed over under-floor heating, this installation technique can help you avoid the introduction of air pockets.

So, there you go, we've gone through all the significant installation techniques and some useful suggestions on the floorboards direction. Having selected the fitting method, you'll need to decide in which way the wood floor should be laid. Our advice is that it is usually best to lay the flooring lengthwise towards the origin of light, for instance the light coming into the area from a door or a window. By fitting the flooring in this direction, you'll make sure that the planks seem best and, additionally, make the space look bigger.